Quick drying primer. Matt finish. Has high adhesion to wood, metallic surfaces, rigid plastics, melamine, formica, et cetera. Free from chrome compounds.

Applications:

It is ideal to seal the pores in untreated wood, plaster, tile or other porous surfaces. Suitable for use both indoor and outdoor use.

Technical characteristics:

Spreading: 1.4 – 1.6 m2 depending on the support.

Total drying: 1 hour.

Repainted: before one hour or after 24 hours.

Colour: White

Instruction for use:
The surface must be clean, dry and free of any contaminants.

1. Shake the spray vigorously for about 30 seconds after hearing the balls sound. We strongly recommend to test it before surface application on a piece of paper so you can measure the proper spray distance; each job may require a different distance depending on the object you are going to paint. The larger the surface area is, the more you need to increase the distance of spraying from the object. The recommended distance is 15-20 cm.

2. Spray criss-cross layers.

In order to get full coverage, it helps to spray from top to bottom, and then from one side to the other side. Doing this will prevent patchiness, but sometimes it isn’t necessary if you have good control of the spray. This paint covers a large surface and is easy to apply smoothly.

3. Clean the nozzle.

Once you have finished spraying your desired item, invert the spray can upside down and press the nozzle until only gas comes out. This will clean the paint circuit and prevent it from clogging so you can use it in future occasions.

Do not use on devices connected to an electric current and apply only in well-ventilated areas.

Once empty, the aerosol spray must be deposited in the yellow container.

Recommendations:

To achieve a perfect finish, repaint with any of our PintyPlus paints 24 hours after the application.

Achieve a perfect finish, repaint with any of our PINTYPLUS range of paints after 24 hours after the application.